|
Betaflex E3 Flexo Sleeve Analyzer
Purchase includes free Beta Color Viewer III
Product Brochure
Specifications
System Requirements:
Processor Pentium 1Ghz or equivalent
Memory 256MB or higher
Disk Space 25MB
Interface 2 x USB
Media CD-ROM
|
High resolution halftone analysis for all flexo plates, films and sleeves
Fast, accurate, and portable, hand held or easily sleeve mounted, for use on photopolymer, elastomer sleeves, steel backed, or translucent plates. Laser ablation masks and plates and all are evaluated for dot area, ruling, and dot quality more accurately than a densitometer.
Use it as a stand-alone to measure plates, prints, and films of any size or with the Sleeve Adaptor to measure sleeves in-the-round.
Benefits for Trade Shops
- Catch imaging errors early in the workflow
- Check film, mask and plate calibration easily
- Verify dot size, screen ruling and barcode geometry
- Document outgoing jobs to improve communications
- Check customer’s print quality to improve fingerprint results
Benefits for Converters
- Never lose press time because of bad incoming plates
- Inspect plates and sleeves on-press for wear and defects
- Capture print image to analyze quality and register
- Measure image geometry in barcodes, traps, reverses
- Document print quality and defects for repeat jobs
|
|
|
Field of View: 7 mm
Dot Analysis: Area, Perimeter, Screen Ruling, Edge Factor
Selectable Region of Interest: 25%, 50%, 80% of frame
Imager: Color CCD
Sensor: 3 megapixel
Resolution: 8 pixels/micron
Interface: USB 2.0
Transfer Mode: ActiveSync
Calibration: Factory calibrated
Dimensions & Weight: 8” x 4” x 3”, 1.4 lbs
|
|
