Live chat by LivePerson

Se habla Espanol!

Impression Setting Tips for Nu Tech Performance Enhancing Cylinders (PEC)

Setting Impression

1. Adjust the anilox roll to the plate, making equal adjustments to both sides.
2. After the plate is inked, adjust the plate to the substrate making equal adjustments to both sides to insure parallelism and cylinder “roundness”
3. Once the printing plate inks the substrate, make small adjustments on impression until you are confident that the impression cylinder, plate cylinder and anilox roll are parallel to each other and slightly touching.
4. Back off the anilox roll impression until it just starts to skip.
5. On some press configurations, you may have to advance the plate cylinder to the impression roll to avoid excess anilox-to-plate impression.
6. At this point, you may start to apply impression to the plate cylinder until you achieve the desired results.

Please Note: Former training may cause hesitation in applying impression to the plate cylinder. The product is designed to absorb the extra impression so do not be reluctant to squeeze the plate to the substrate.

Remember: The key advantage of a PEC is to provide a platform for a plate that will allow for over-impression and absorb vibration created in the nip. The vibration that is created is a combination of shafts turning, gears meshing, plates contacting anilox rolls, variation in cylinder TIR, and the shuddering created by the die cut station along the frame of the press.

The coating responds as a shock absorber and allows you to over-impress the plate to the substrate without the usual negative consequences.

Contact Us:

E-Mail

Telephone/Fax

Postal Mail

Return Policy

Se habla Espanol
Preguntar por Frank @
1-336-812-3784

For questions about orders:
orders@flexoexchange.com

For website questions:
webmaster@flexoexchange.com

For technical support: 
help@flexoexchange.com
 

PHONE
Toll-Free, US/Canada: 1-866-416-1484
Outside US/Canada: 1-336-812-3784

FAX:
Toll-Free, US/Canada: 1-866-467-7942
Outside US/Canada: 1-336-884-5382

FlexoExchange
3219 Timberwolf Ave.
High Point, NC  27265

We offer a no-hassle, 30-day satisfaction guarantee on almost every product we sell (books and software excluded). If you don’t like it, just get it back to us, in like-new condition and in the original packaging, within 30 days and we’ll give you a full refund, minus the shipping cost.

© FlexoExchange, LLC 1997-2008 All Rights Reserved

Do you Flexo?™

  Gorilla Printing™

 Gorilla Flexo™