Aluminum oxide

Ask or answer questions related to the flexo pressroom environment

Moderator: Frank Burgos

Aluminum oxide

Postby spot » Fri Aug 11, 2017 6:36 pm

good afternoon . I have a question for the group. has any on ever printed a Aluminum oxide coated film and if so what is the best way to identify the coated side of the film?? all your replies are greatly appreciated . Spot
spot
 
Posts: 16
Joined: Sat Feb 05, 2011 1:56 pm

Re: Aluminum oxide

Postby longtimefan » Sun Aug 13, 2017 10:49 pm

All I ever used was aluminum.. One side shinny other dull
longtimefan
 
Posts: 50
Joined: Sat Jun 13, 2015 1:10 pm

Re: Aluminum oxide

Postby T Murugadas » Fri Aug 18, 2017 2:36 am

If you keep metal coated film outside, without any cover, it may become oxide due to moisture. Scratch any side of the film on the floor. If the metal goes, it is metal side. If it doesnt go, it is film side.
T Murugadas
 
Posts: 12
Joined: Mon May 07, 2012 2:30 am

Re: Aluminum oxide

Postby inkman » Sun Aug 20, 2017 11:20 pm

A pencil eraser will remove the metal from metallized film.
User avatar
inkman
 
Posts: 242
Joined: Thu Mar 12, 2009 4:14 pm
Location: Carolina


Return to Pressroom

Who is online

Users browsing this forum: Bing [Bot] and 1 guest