10DP Distortion Table .067" Plate

Ask or answer questions related to the flexo pressroom environment

Moderator: Frank Burgos

10DP Distortion Table .067" Plate

Postby SambaFlexer » Wed Apr 11, 2018 8:30 am

Hi, I'm trying to find a 10DP Distortion Table that is for .067 material. The chart here on Flexo Exchange only has one using .107

I'm trying to figure out the repeat and distortion for 57T .067"

Or maybe some one knows the formula?

Thanks! for any help!
SambaFlexer
 
Posts: 9
Joined: Fri Dec 15, 2017 2:50 pm

Re: 10DP Distortion Table .067" Plate

Postby Fuzz » Wed Apr 11, 2018 9:15 am

http://www.flexoexchange.com/tools/flex ... lator.html

Here is the link for a calculator on flexoexchange. it does .067 10dp.
Fuzz
 
Posts: 275
Joined: Mon Jan 19, 2009 4:37 pm

Re: 10DP Distortion Table .067" Plate

Postby SambaFlexer » Sun Apr 15, 2018 9:47 pm

Thank for the reply! But I guess I'm not asking the right question...

I have a customer who has a new (used) 10dp press. And I'm trying to help figure out what thickness plates and mounting tape their 57T cylinder should be using.

How do I go figuring that out?
SambaFlexer
 
Posts: 9
Joined: Fri Dec 15, 2017 2:50 pm

Re: 10DP Distortion Table .067" Plate

Postby guy de cafmeyer » Mon Apr 16, 2018 12:47 am

The calculation can be made from the ; bare cylinder diameter / tape thickness used . .
Do you have this info ?
guy de cafmeyer
 
Posts: 49
Joined: Tue Apr 14, 2015 3:13 am

Re: 10DP Distortion Table .067" Plate

Postby SambaFlexer » Mon Apr 16, 2018 4:19 am

They haven't used the press yet so the recommended tape thickness is part of what we're trying to find out.

They said the cylinder they have is 57T, the downloadable 10DP chart is showing the repeat for 57T to be 17.9071". And the chart also says .107, does this mean the 17.9071" is based off using .107 material? Or is the 17.9071" the circumstance of the bare cylinder?

So what I'm trying to figure out is, what plate and tape thickness should they be using with the 57T cylinder they have?
SambaFlexer
 
Posts: 9
Joined: Fri Dec 15, 2017 2:50 pm

Re: 10DP Distortion Table .067" Plate

Postby richflexo » Mon Apr 16, 2018 3:09 pm

.015" tape and .067" plate is your best solution.
richflexo
 
Posts: 72
Joined: Fri Jun 01, 2012 3:01 pm


Return to Pressroom

Who is online

Users browsing this forum: Bing [Bot], Google [Bot] and 4 guests

cron