2.6 Mil Cavitated White BOPP with .92Mil PET Liner

Ask or answer questions related to the flexo pressroom environment

Moderator: Frank Burgos

2.6 Mil Cavitated White BOPP with .92Mil PET Liner

Postby tonick60 » Fri Sep 09, 2011 8:24 pm

Has anyone seen issues die cutting this stock? We run millions of feet of this stock on our big presses with very minimal issues die cutting but tend to have lots of die cutting issues on our smaller presses. We have Mark Andy 4150's, We use Rotometrics Magnetic Dies and Magnetic Cylinders. We have even gone as far as purchasing adjustable clearance anvils. We see some issues on the 2Mil clear BOPP with the .92Mil PET Liner but most of our issues are on the cavitated. Any suggestions? Is there a different supplier out there that has had better luck with this material? We have tried Electro Optics, and Kocher+Beck they where more expensive with the same results.


Tonick60
tonick60
 
Posts: 74
Joined: Tue Apr 21, 2009 11:31 am
Location: Connecticut

Return to Pressroom

Who is online

Users browsing this forum: No registered users and 1 guest

cron