Seamless Joint with Flexo Plates

Ask or answer questions related to the flexo pressroom environment

Moderator: Frank Burgos

Seamless Joint with Flexo Plates

Postby Naveed ul haq » Fri Feb 16, 2018 2:43 pm

Good Day.
Anyone can guide how we can get perfect seamless joint with flexo plates during mounting?
Bye
Naveed ul haq
 
Posts: 5
Joined: Thu Nov 02, 2017 11:52 am

Re: Seamless Joint with Flexo Plates

Postby richflexo » Fri Feb 16, 2018 4:37 pm

Best way i've seen people do it is with bevelling each side with a 45° angle cut. Takes some time and practice and really sharp blade. You'll still get a small seam but its the only way way unless you go with In The Round plates.
richflexo
 
Posts: 74
Joined: Fri Jun 01, 2012 3:01 pm

Re: Seamless Joint with Flexo Plates

Postby Naveed ul haq » Sat Feb 17, 2018 12:08 pm

Thanks
Yes you are right, we have same practice and get small seam but facing pin holes at edges because of gap under joint of bevel cut,Thanks
Naveed ul haq
 
Posts: 5
Joined: Thu Nov 02, 2017 11:52 am


Return to Pressroom

Who is online

Users browsing this forum: No registered users and 12 guests