Eyemark trouble after running on press.

Ask or answer questions related to the flexo pressroom environment

Moderator: Frank Burgos

Post Reply
Amrtz
Posts: 1
Joined: Tue Feb 20, 2024 8:10 pm

Eyemark trouble after running on press.

Post by Amrtz »

Ok
Last edited by Amrtz on Thu May 30, 2024 4:36 pm, edited 1 time in total.
longtimefan
Posts: 430
Joined: Sat Jun 13, 2015 1:10 pm

Re: Eyemark trouble after running on press.

Post by longtimefan »

Can you shim the nip where it bolts in the holder? Add an extra washer to the threaded bolt somehow?
Frank Burgos
Site Admin
Posts: 1255
Joined: Wed Dec 31, 1969 8:00 pm
Location: North Carolina
Contact:

Re: Eyemark trouble after running on press.

Post by Frank Burgos »

Please take a sample and measure the repeat between images for one more repeat that the number around.

For example, if the job is four around, measure five image repeats.

All should be equal. If not equal, there should only be one that is too short or too long.

If that's the case, your distortion + tape + bare sleeve diameter + plate combination is not a good match.

If it's not like that, then you've got other challenges. Please post the values you get and we'll see what it looks like. Also, if you think an image will help us see the problem, please post.
Post Reply